Phantom Class Forum
Technical => Technical Questions => Topic started by: PMaughan on March 06, 2020, 01:16:36 PM
-
Not sure why I’m finding this so difficult to find out but here I am! Does anyone know which gooseneck I need for the S2 mast?
Thanks
Pete
-
Pete
suggest you go direct to Selden in Hampshire. Avoid their composite bracket which fails. 100% stainless is best by far. Use rivets which are intended for carbon not metal btw
-
Thanks Steve, sounds like good advice. I've had two of the composites go now so will go stainless.